Learn how to connect the BiLumix® Cam to Wi-Fi with this step-by-step video guide. Ensure a smooth setup for capturing clinical visuals directly from your headlamp-mounted camera system.

BiLumix Cam

This video instruction describes how to connect the camera with Wifi

How to connect the camera with Wifi

Learn how to attach, detach, and calibrate BiLumix® loupes—including 1.5x, 2.5x, 4x, FLEX, and Ergo models. These step-by-step videos help ensure optimal fit, alignment, and performance for clinical precision.

HeadLamp Loupes

This video instruction describes how to properly set up your 1.5x loupe of your BiLumix. For GEN 2 & 2S, the 1.5x loupe attach to the back of the light source. The hook of the lens should go in the top hole.

Standard Loupe

How to attach/detach 1.5x Loupe

This video instruction describes how to properly setup new 2.5x FLEX loupes on BiLumix headlamp.

How to attach/detach 2.5x Loupe

How to attach/detach 4.0x Loupe

FLEX Loupe

How to attach/detach FLEX Loupe

This video instruction describes how to properly calibrate your 2.5x loupes to match your interpupillary distance and your focal/working distance.

How to calibrate 2.5x loupe & 2.5x loupe FLEX

This video instruction describes how to easily switch your loupes from the basic 1.5x to the 2.5x or 4x loupes and vice versa.

Ergo Loupe

How to attach/detach Ergo Loupe

Watch how to properly mount the BiLumix® Face Shield X2 onto your headlamp system. This step-by-step guide ensures a secure fit and optimal protection for clinical or surgical environments.

Face Shield Instruction

This video instruction describes how to setup BiLumix Face Shield on BiLumix headlamp

How to mount Face Shield X2

Learn how to safely replace, connect, and charge the BiLumix® GEN 2 and GEN 2S Headlamp battery. This guide includes essential tips to ensure proper handling, safe operation, and optimal battery performance.

(GEN 2 | GEN 2S)

GEN 2 Series Battery

How to replace battery of BiLumix Generation 2 Headlamp

This video instruction describes how to turn on/off the light on your BiLumix and details some common problems and troubleshooting tips with regards to the LED lights. 
 Do not remove the battery while in use. Make sure to turn off the headlamp via the on/off switch on back before removing the battery.
 * To turn on the light, hold down the power button for 1 second.

Replacing Battery

This video instruction describes how to properly insert and remove the battery. 
 Do not remove the battery while in use. Make sure to turn off the headlamp via the on/off switch on back before removing the battery.

Checking battery connection

This video instruction describes how to charge the battery.

How to charge the battery

Learn how to set up, adjust, and maintain the BiLumix® GEN 2 and GEN 2S Headlamp series. This guide includes video instructions for fitting, battery replacement, light control, and usage best practices.

(GEN 2 / GEN 2S)

GEN 2 Series Headlamp


          The video is an instructional guide demonstrating how to wear and get started with the BiLumix® GEN 2 Series HeadLamp (GEN 2 & GEN 2).
        

The video is an instructional guide demonstrating how to wear and get started with the BiLumix® GEN 2 Series HeadLamp (GEN 2 & GEN 2).
 <ul>
 <li>Adjust the headband for a secure fit</li>
 <li>Turning the light ON/OFF</li>
 <li>Taking off the headlamp</li>
 </ul>

Basic

BiLumix 101

How to replace battery of BiLumix® Generation 2 HeadLamp

This instructional video shows how to safely and correctly replace the battery on the BiLumix® GEN 2 Series HeadLamp (GEN 2 & GEN 2). It demonstrates:
 <ul>
 <li>Opening battery the compartment cover</li>
 <li>Removing old battery</li>
 <li>Inserting new battery</li>
 <li>Closing battery the compartment cover</li>
 </ul>

This video demonstrates how to properly adjust the BiLumix® HeadLamp for a secure and comfortable fit. It covers:
 <ul>
 <li>Using the headband adjustment side button to tighten or loosen the headband</li>
 <li>Extending and adjusting headband size</li>
 </ul>

How to adjust the size

This video demonstrates how to properly adjust the light intensity of BiLumix® GEN 2 series HeadLamp (GEN 2 & GEN 2S) from low to max using dial at rear side.

Light Intensity Control

This video instruction describes how to adjust the height of your BiLumix® HeadLamp's rear pad to the most comfortable fit for your head.

How to adjust rear height

The video walks through eleven common mistakes users should avoid when using the BiLumix® headlamp system

The video walks through eleven common mistakes users should avoid when using the BiLumix® headlamp system, including:
 <ul>
 <li>
 When you put it on, DO NOT pull by force. It may break.
 <ul>
 <li>
 Extend the headlamp fully before use.
 </li>
 <li>
 Adjust the size AFTER putting it on.
 </li>
 </ul>
 </li>
 <li>
 When you turn the power on, DO NOT press and hold. Just tap once
 </li>
 <li>
 When you take it off, DO NOT pull by force. It may break.
 <ul>
 <li>
 Extend the headlamp fully before taking off.
 </li>
 </ul>
 </li>
 </ul>

Things to AVOID

how to adjust the angle of lights for the focus of spot light from dual light sources

This video instruction describes how to properly adjust the angle of BiLumix Gen2S headlamp lights for configuring the focus of spot light from dual light sources

For GEN 2S

How to adjust light angle

How to lock light angle

Explore how to replace key BiLumix® HeadLamp components including the light handle, rear support leaf, forehead plate, cushion pad, and filter cap. Step-by-step videos ensure proper maintenance and longevity.

HeadLamp Replaceable Parts

This video instruction describes how to replace component of BiLumix® HeadLamp system.

This video instruction describes how to replace component of BiLumix® HeadLamp system. Including:
 <ul>
 <li>
 Light source handle
 </li>
 <li>
 Rear head support leaf
 </li>
 <li>
 Forehead plate
 </li>
 <li>
 Light filter cap
 </li>
 </ul>

Component Replacement

This video instruction describes how to replace the handle used to flip your Bilumix® HeadLamp up and down.

How to replace light source handle

This video instruction describes how to correctly replace the head support on the underside of your BiLumix® HeadLamp located towards the back.

How to replace head support leaf

This video instruction describes how to replace the forehead plate of BiLumix® HeadLamp.

How to replace forehead plate

This video instruction describes how to replace the light filter cap on the light source of BiLumix® HeadLamp.

How to replace light filter cap

This video instruction describes how to correctly replace the forehead cushion of your BiLumix® HeadLamp.

How to replace front pad/cushion

Learn how to set up, adjust, and maintain the BiLumix® GEN 3 and GEN 3S Headlamp series. This guide includes video instructions for fitting, battery replacement, light control, and usage best practices.

(GEN 3 / GEN 3S)

GEN 3 Series Headlamp

This video demonstrates how to get started with BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S).

This video demonstrates how to get started with BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S). Including:
 <ul>
 <li>
 Connecting external battery to device
 </li>
 <li>
 How to wear headlamp
 </li>
 <li>
 Turning light ON/OFF
 </li>
 <li>
 How to control light intensity
 </li>
 </ul>

User guide to GEN 3 series

This video demonstrates how to properly connect external battery of BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S) to the device.

Connecting External Battery

This video demonstrates how to properly wear BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S) over your head.

How to wear headlamp

This video demonstrates how to turn light on and off of BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S).

Turning light ON/OFF

This video demonstrates how to properly adjust the light intensity of BiLumix® GEN 3 series HeadLamp (GEN 3 & GEN 3S) from low to max using dial at rear side.

This video demonstrates how to properly adjust the light intensity of BiLumix® GEN 2 series HeadLamp (GEN 3 & GEN 3S) from low to max using dial at rear side.

Manuals

Pages

Products

Legal

Follow us